I’m never putting one of these in my home.

  • Cihta@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 年前

    I’ll get a lot of hate for this but when you say pi you mean pi4. I kept seeing this HA on lemmy and tried it on a pi2. I don’t know if it worked or not, it’s a very bloated piece of software. After an hour of waiting I installed docker and the HA instance on my main server (which is ancient) in under a minute.

    It’s cool and all but my feit dimmers require some pcb work and flashing to be compatible so verify what devices you have before you hop in.

    I used to have an automated building running on a bare 386 and a floppy drive. Hate on me all you want but sending simple commands like turn device on shouldn’t require a giant software package but otherwise HA is neat, just a lot of overhead i can’t exactly justify.

    Worth trying out though.

    I think reflow stole a lot of their code.

    • AbidanYre@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 年前

      No hate from me.

      Just about every project I’ve started with a pi has ended up working out a lot better as a vm on an x86 host. But lots of people seem to love them.

      • Cihta@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 年前

        To be fair It has its uses i suppose. I’ve had one running pihole since the original pi came out. Used PI2s in the past for OSMC and, even better, ambilight.

        I think now a cheap android TV box you can flash is probably better for a simple less than 5watt device.

        Besides the HA test I’ve been trying to use one to be an openvpn TAP interface but it’s been a fight and i think you just convinced me to do it in another docker instance on the server and save myself some headaches.

        • AbidanYre@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 年前

          PiVPN was actually one of the things I thought the HW handled pretty well. Other than how much it ends up getting throttled by the 100Mbps link.

          • Cihta@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 年前

            It seems like it would but the pivpn install script always hangs on me whether i I select openvpn or wireguard. Based on some reading I was lead to believe I needed to just use raw openvpn for a TAP interface. I’ve tried a few times but I always end up with CA issues or just flat out failure to connect.

            It should be pretty simple, I’m just trying to bridge my network to a single remote device connected via cellular gateway. Maybe I’m just out of my depth. I’ve done it before with an old NAS years ago but I’ve tried a few step by step guides and no dice.

            If you have any tips that’d be great!

            • AbidanYre@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              1 年前

              Wish I could help.

              I used it a few years ago for a simple wireguard link but eventually moved the vpn into my opnsense instance