I’ve wanted to get into 3d printing for a while now and have been checking out the prusa mk4 and the bambu lab x1.

The bambu looks amazing in all aspects besides repairability and offline printing, with the latter one looking like a real deal breaker. It seems like all the more advanced features need a connection to the cloud, which I really don’t like.

On the other hand we have the prusa which seems to be running really rushed software still missing a lot of features that the hardware should be able to support and the price looks like way worse value compared to the stuff you get with the bambu. At least it’s repairable and no cloud bullshit.

Should I just come back in a year and hope that the mk4 software has gotten better or the bambu doesn’t require internet for all the cool stuff?

Edit: Just woke up and I want to thank everyone in this thread for the quality replies! I’ll look into 3d modeling first and if the prusa doesn’t anymore have janky alpha input shaping 2-3 months from now I’ll go with that, otherwise I’ll have to look for alternatives. Since I’d be running prints throughout the day while I’m not at home, I’d want something more reliable than an ender 3.

Edit 2: I just found out about the Bambu p1s, I might just get that one.

  • monerobull@monero.townOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Thank you for the detailed reply. What do you think about the new Bambu P1S? Looks like the main difference to the carbon is no lidar and a worse screen and with the ams addon it’s 1000€ vs 1500€ for the carbon. I’m seriously considering getting the P1S.

    • elrik@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      The P1S does seem like a good value overall.

      I’ve heard the screen is quite primitive with the P1 printers, and I expect that will become your primary interface with the printer if you are not using the cloud print functionality.

      You will also not get the benefit of the automatic calibration features.

      For myself that makes it less desirable. However, there is also some value in understanding the manual filament tuning and printer calibration process as it helps you troubleshoot when things go wrong.

      If the P1S existed when I was getting into 3D printing, I likely would have purchased it. It’s at a similar price point without the AMS to the Ender 3 S1 Pro (which is what I learned on) and the P1 has many more capabilities.

      • monerobull@monero.townOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        You will also not get the benefit of the automatic calibration features.

        You are talking about the lidar? It can still auto-bed-level without internet right?

    • bitsplease@lemmy.ml
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I’ve got the P1P (and am waiting for the P1S upgrade kit) and I’ve got to say I absolutely love it.

      I know it’s not popular on here because it’s proprietary, and a lot of people in this hobby don’t like the “It just works” mentality as opposed to the “I custom built this from scratch” outlook, but I got into 3d printing because I want to print things, not because I want to spend loads of time fiddling with my printer. I spend plenty of time fiddling with my various creations and custom models, I just want a printer that I know will reliably print what I’m asking for and use my time and energy on creating things.

      I also went back and forth over the X1C over the P1P (The P1S didn’t exist when I ordered mine), but from what I understand the differences between the X1C and the P1(P/S) are very incremental. The lidar is nice, and does improve print quality, but having looked at some comparisons, the end-result difference is very minuscule. As for the screen, I honestly don’t see why people are so fussed about the smaller screen - I use Bambu Studio for kicking off all my prints, so the only thing I really use the build it screen for is checking up on print times when I don’t feel like going up to my PC, or changing filament, and it works fine for those purposes.

      Especially now that the P1S offers a high quality enclosure, I think the value add for the X1C doesn’t make a ton of sense, You can literally buy 2 P1P’s for the cost of a single X1C, and I don’t personally feel that the improvements to the X1C justify that price difference unless you really need the absolute highest possible print quality.

      Repair-ability is the usual issue most people take with Bambu printers, because it’s proprietary - but their replacement parts are super affordable, and I’ve yet to hear actual testimonial from a Bambu printer owner who had their printer die on them and was unable to get it fixed. The proprietary nature also makes people worried about “what if Bambu goes out of business in a few years”, which is valid - but given that they’re one of the biggest players in the consumer 3d printing industry after only a short time in the market, I really don’t see them going anywhere any time soon

      tl;dr - The p1p was my first entry into 3d printing, and the only complaint I’ve got so far is that the P1S upgrade kit is backordered to August. Otherwise it’s been a practically flawless entry into 3d printing

      • monerobull@monero.townOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Thanks for the input. I’m mainly worried they rugpull us by doing something like nfc proprietary filament once they have a big enough customer base but the P1S is just killer value compared to any other fdm printer. I commissioned some 3d models this week and have friends who ordered a carbon so I’ll probably get a P1S in a couple of weeks (unless the recently trademarked bambu models are even better value).

        • bitsplease@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          That’d be pretty unprecedented, and if they did go that route, it could only be for a newer model of printer than anything out today (you’d need new hardware to do the spool check), so you’d be safe regardless

            • bitsplease@lemmy.ml
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Ah, I don’t have an AMS, so I didn’t know that - either way I really don’t think it’s likely, but if you’re really that concerned, plenty of other options 🤷🏼‍♂️